How to Maintain Your Own Swimming Pool

Image result for Swimming Pool Istock
Keeping your swimming pool clean at all times is not a very difficult task. Pools are different from each other and so are their preservation needs. Frequent, routine care is necessary for a healthy and clean swimming pool. It is important to have a pool maintenance guide if you want to prevent issues before doing anything.  Doing regular pool maintenance will free you from anything that will cause annoyance and emergency trips to the store for supplies. To get more info, click pool maintenance Cape Coral. Even if you decide to hire a professional for cleaning your pool, there are still some important things that you need to do to ensure that your pool is in good condition all the time.
 Here are some guides for pool maintenance.
The chemistry of your pool needs to be observed at least 2 time a week through the summer and once during winter.  If your pool is winterized during the winter, then there is no need to test the water.  Remember that algae and bacteria can still grow even when it is cold outside.  Shock your pool every 6 weeks or so even during the winter months.
It is important to check the water level once a month and adjust as required.  Make sure that the water level is at the middle of the skimmer.  A very high water level will not help the water circulate and move.
You need to scrub your walls and tiles regularly.  Algae issues will be eliminated by scrubbing the walls.  If you keep your tiles clean, it will save you money. The places where you can find the most algae is on your walls and steps.  So, keep them clean.
Replace all broken or misplaced drains and suction supplies.  This is important in swimming pool maintenance.  If there is a suction side leak at the pump, you are sucking air into the system. To get more info, visit Cape Coral pool cleaning. To verify this, run the equipment and look at the after coming out of your water lines.  If there are a lot of air bubbles, there may be excessive air getting into the system  Too much air coming into the system will make your pump dry and freeze. There is a need of replacement which can be very expensive.
The pH level should not go above 8.0.  Keep the pH in check so that you can use the maximum potential of the chlorine contained in the pool.  The effectiveness of the chlorine will be reduced if the pH reaches below 7.2.  This means that there is less benefit from chlorine even if you add more of it.  This results in throwing away money.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s